cancel
Showing results for 
Search instead for 
Did you mean: 

How to get Tx Power dBm?

Greg_WiGuy
Contributor II

Are there any definitive ways to get the actual Tx Power in use of a radio in rkcli instead of what the attenuation is from assumed Max power?  Reason being is some channels have different limits per regional regulation and we need some way of knowing the exact power that is actually in use, not something that is inferred by user calculation.

1 ACCEPTED SOLUTION

I understand your concern, Greg. I will have a Feature Enhancement Request created for this improvement.

-Ankush

View solution in original post

6 REPLIES 6

Ankush_Chandan
RUCKUS Team Member

Hi Greg,

Please refer to this KBA on AP TX power:

https://support.ruckuswireless.com/articles/000001595

PS: The rksap_cli is not supported on the SZ platform. However if you need the AP shell output of "iwconfig" for all AP's to check their TX power, you could contact support and we can help pulling this information. I would also discuss with out AP PLM on adding a support to equivalent CLI on the AP to ease up the process.

Regards,

-Ankush

Thank you Ankush, unfortunately I am on SZ and can't run the command on my own.  Would really like to have this available in the GUI+CLI if possible.  Is there anything I can do to request this as a feature?

I understand your concern, Greg. I will have a Feature Enhancement Request created for this improvement.

-Ankush

Is it possible to get a reference number for the Feature Enhancement for tracking purposes?