Yes, I have 22.214.171.124. Are you saying downgrade to 126.96.36.199.312 and then use the web gui to flash 188.8.131.52.663 or 100_2_1_0_148? Do I reset to factory defaults and do minimal configuration with the unleashed wizard?
I'm a little gun-shy because I know that when you convert from standalone to unleashed you must do a factory defaults reset before flashing or else you will brick the AP (ask me how I know).
when I did it... I had to reboot it physically and then it worked on standalone firmware. So what were you testing with unleashed? I recommend for unleashed stick with 200.6.10.x firmware currently since so far the current 207.10.x has issues with iOS devices..where you get extreme slow downloads and extreme fast uploads.
downgrade to 184.108.40.206.312 [this results in a factory defaults reset]
upgraded to 220.127.116.11.663 [I probably could have gone directly to 18.104.22.168.663]
Once it was running 22.214.171.124.148 I could not into the web gui but ssh always worked. This turned out to be firefox retaining cookies that the unleashed web gui had left behind. Once I removed them the web gui started worked.
I wanted to switch back to standalone because I want a more complicated vlan configuration and possibly use the second gige port. I also never liked the fact that I couldn't get the iphone speedflex app to really ever work at all. Now that I'm running 110.2 I can download UDP at about 700 Mb/s.