High CPU AP - SNMP PRTG - Page 2 - RUCKUS Community Forums

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Hi,

I have an issue with APs r310, r600, zf7982 and zf7372

In our environment we have implemented 472 AP, 333 in zone 3.6 ( zf 7982, zf 7372 and others) and 139 AP in zone 5.2 (r310, r600 and others).

All APs are monitored with PRTG- SNMP, recently some APs r310, r600, zf7982 and zf7372 presents on PRTG high CPU 100%, 5-7 clients per radio; we try to access ssh and the connection becomes slow and lose the access, the user experiments intermittence; we reboot, reset and change the firmware, however, the issue persist; but if we replace the AP for another model (r610, r710) the issue dissapear

Is there a configuratión or action that we could do to resolve the problem (high cpu)?

thanks

3 REPLIES 3