This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject

 

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

 

Ruckus Wireless
RUCKUS Self Help |   ASK the Pack
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

E510 DC Power

Anonymous
Not applicable

‎08-27-2021 05:37 AM

I'm getting a couple of E510s for outdoor coverage.  I'm not running ethernet to them as I plan to use them in a mesh.  I will have 12V power to them.  There is an M8 connector for DC power, but I can't find a pinout or adapter for the DC power port.  Anyone know how I wire in the 12V power?

0 Kudos
Reply
2 REPLIES 2

DarrelRhodes
Valued Contributor

‎08-27-2021 08:41 AM

Hi Roopesh,

You have my sympathy, this information was very nearly impossible to find!

One of my amazing colleagues in the UK went digging in our product technical archives and found a product specification document with the following noted on the very last page:

Pin1 => positive

Pin3 => Negative

The document is internal-use-only but I hope the above helps!

All the best,
Darrel.

Reply

Anonymous
Not applicable

‎08-27-2021 10:20 AM

Thank you @darrel_rhodes and your UK team!  I look forward to getting this setup.  I hope the pins are labeled 🙂

0 Kudos
Reply
Copyright © 2026 Khoros, LLC