cancel
Showing results for 
Search instead for 
Did you mean: 

Download firmware 3.1.2.0.150 for ZF7343

ivan_gonzalez_g
New Contributor III
Hello,
There is the possibility of loading a Ruckus ZF7343 AP firwmare 3.1.2.0.150 directly, to be discovered by the VSZ-H controller.

Thank you very much for the help
4 REPLIES 4

michael_brado
Esteemed Contributor II
No, you would load the Solo AP image, 100.1.0.0.432 which can connect to ZDs or SmartZone controllers.
Here's the link:  https://support.ruckuswireless.com/software/838-standalone-ap-software-100-1-0-0-432-indoor-aps

ivan_gonzalez_g
New Contributor III
Hi,

Thank you very much for the reply.

To connect an AP ZF7343 to the Virtual SmartZone High scale which image could be used? 100.1.0.0.432 Would serve us?

Thanks

Yes, the 100.x Solo AP firmware can join a ZoneDirector or SmartZone controller.

Yes, the 100.x Solo AP firmware can join a ZoneDirector or SmartZone controller.