Download firmware 3.1.2.0.150 for ZF7343

[Anonymous]

Hello,

There is the possibility of loading a Ruckus ZF7343 AP firwmare 3.1.2.0.150 directly, to be discovered by the VSZ-H controller.

Thank you very much for the help

[michael_brado]

No, you would load the Solo AP image, 100.1.0.0.432 which can connect to ZDs or SmartZone controllers.
Here's the link:  https://support.ruckuswireless.com/software/838-standalone-ap-software-100-1-0-0-432-indoor-aps

[Anonymous]

Hi,

Thank you very much for the reply.

To connect an AP ZF7343 to the Virtual SmartZone High scale which image could be used? 100.1.0.0.432 Would serve us?

Thanks

[michael_brado]

Yes, the 100.x Solo AP firmware can join a ZoneDirector or SmartZone controller.

[michael_brado]

Yes, the 100.x Solo AP firmware can join a ZoneDirector or SmartZone controller.