Does Unleashed Firmware works fine on Rackus 7372 AP?

[abhaya_ghatkar]

Hi Team, 

We had Rackus 7372 AP with Software Version:104.0.0.0.1347 setup in our office, but lately from past two months we were facing a lot of interference with other WiFi connection and due to that a lot of internet connection issues occurred frequently. 

Recently, we have upgraded the software version to 200.6.10.1.312 (Rackus Unleashed) on Rackus 7372 on one of our router, which is working fine. And now we are planning to upgrade the software on rest of the routers in our office.

But as per the documentation, I can see that Rackus Unleased is supported only for Rackus 500+.  

Can you please help us know what can be the issues we may face installing Unleashed software for Rackus 7372?

[michael_brado]

NO... Abhaya has NOT used "Ruckus Unleashed" code on a ZoneFlex 7372. 
We have never had support on 802.11a/n only, ie 7982 either, only 802.11ac AP models
(except R700/R300).

See the list of supported APs on the Unleashed product page on our Support portal here:
https://support.ruckuswireless.com/product_families/19-ruckus-unleashed

[Rafael]

How you have done to use this firmware? When I try it, appear a message that says "new firmware too big"

[DarrelRhodes]

You cannot use Unleashed with any 802.11n APs (including ZF7372).

[cavsusainc]

When I try to upgrade Ruckus ZF7372 (current version 104.0.0.0.1347) to Unleashed 200.6.10.1.312, I get an error that the new firmware is too large. How did you upgrade your ZF7372?