Constant Power Cycle after upgrade to 200.9.10.4.202

[r_v_7xpcziruizl]

Ruckus R610 unleashed upgraded to latest firmware (200.9.10.4.202) yesterday, keeps power cycling constantly with no pattern.

I get the same message every time. No other reasons.

These are the messages on logs:
2020/10/01  16:38:51
High
AP[RAP@XXXXX] warm boot successfully, last reboot reason [power cycle detect].
2020/10/01  16:38:50
High
AP[RAP@XXXXXX] joins with uptime [182] s and last disconnected reason [AP Restart : power cycle detect]

[greg_boynton]

@r_v would love to know what is resolve. I am an r510 unleashed customer and have 4 of them and my system is doing the same thing no that I am on 200.9

[florian_fuchs]

I have 1x R320 and 1x R610 (as Master) installed in Unleashed Mode. I can also confirm the Powercycle/Reboot-Problem. Only downgrading to 200.8.10.3.278 solved the problem.

[greg_boynton]

@florian_fuchs do we know if ruckus is addressing? I swear I red 200.10 is out? The app does not allow for 200.10 upgrade yet.

[tony_heung]

For the random reboot, please check if the below feature has been enabled.

Admin & Services -> Services -> WIPS -> Rogue DHCP Server Detection