RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
11-26-2020 05:20 PM
I want to get email notifications if an AP goes down or overloaded with traffic. Is this feature available on Unleashed?
I thought I found it under Admin & Services->Administration->Network Management->Alarm Notification but did not work for me when I tested it. I have checked enable email server, check all alarm notifications, checked send an email message when an alarm is triggered, and did test to email address working. But when I killed power (unplugged PoE cable) to AP I do not receive any notification. However, when I powered back the AP, I did got an "AP Has Joined" email notification.
11-27-2020 07:24 AM
200.7.10.202.121
11-27-2020 08:56 AM
Thanks. I have not used ZD. Can it also notify you if an AP's usage load goes over a certain load? Any monitoring and reports? I like to be able to identify an AP or client and it's usage over time in a day, week, or month.
11-27-2020 08:57 AM
Hi Thomas,
Many thanks for confirming. I've quickly configured a T300 with Unleashed 200.7.10.202.121 and I can confirm the email notifications appear to be working perfectly.
I get immediate notifications when I reboot the AP, when I disable a radio and when I connect/disconnect a favourite client.
I would recommend trying one of your APs in a test, after a factory reset, try configuring the email, check it works, then try uploading your config and see what happens.
HTH,
Darrel.
11-27-2020 10:51 AM
Can you try disconnecting (or unplugging power) to AP? I do not get any notification of AP going offline.
11-27-2020 12:38 PM
Hi Thomas,
Yes, I rebooted the AP and was sent an email alert.
Darrel.
