Hi, I've got a ZD1200, 12 R700s, 2 T300s, and an Apple Airport Express. Everything is working nicely. When using airplay from my iPhone 6, The music streams well when I'm near one of the access points. When I'm in an area with limited wifi coverage - ~20db, 20% signal, it still works MOST of the time, but will occasionally glitch. It is very unreliable. Is there anything I can do improve the streaming, other than adding new access points? Looking to get this resolved, as it's been quite troublesome for this site. Thanks!
Thanks for your quick reply. I am running 184.108.40.206 build 216. Didn't realize there is a newer firmware out. I've looked at the channels and noticed that sometimes it's 2.4ghz and other times it's 5ghz. There are very few other wifi devices on this network. I'm not familiar with background scanning/ channelfly. Do you have any links/ resources? Thanks!
OK, I upgraded to 220.127.116.11.140. Still experienced the same issues.
I just configured both 2.4ghz and 5ghz to use ChannelFly. I also checked the first checkbox on the services screen, for "Automatically adjust AP radio power to optimize coverage when interference is present." That a good idea?