cancel
Showing results for 
Search instead for 
Did you mean: 

After v10 upgrade ap's go into infinite reboot

ruben_herold
New Contributor II
hi,

after upgradeing our zd1200 to version 10 all our ap's which are located in an vlan with
enabled router advertisment and configured for ipv6 and ipv4 static goes into infinite reboot.

Log messages looks like:

2017/05/19  09:29:54Medium AP[ap-name] reset due to IP address change2017/05/19  09:29:53Medium AP[ap-name] joins with uptime [75] s and last disconnected reason [AP Restart : application reboot]

It looks like that even if you have configured a static ipv6 ip as gateway and configured ipv6 static
the ap get his gateway via router advertisment. This looks for the controller like the address configuration has changed.

Fast solution:
               configure ap manual
               use keep ap's settings in the ap profile


Nice solution please implement:

             If ipv6 is configured static ignore advertisments.....


 
1 REPLY 1