cancel
Showing results for 
Search instead for 
Did you mean: 

A way to use 6 MHz channels on Ruckus APs

abdou_mfopa
New Contributor
I would like to use 6MHz wide channels on ZoneDirector, SmartZone 100 and SmartZone 300  and out-door APs on 5GHz and 2.4GHz (R700 and R300).

I know I can use some 20 or 40MHz channels on bridges, but available channels are limited and I would need as much of the 5GHz and of 2.4GHz spectrum as possible. The regulator in my Country allow to use 6MHz wide channel to deploy network operator. Please can you give me the way to do it on APs and bridges?
2 REPLIES 2