7982's and HP 5406zl

[brandon_mancheg]

Anyone encounter any issues when uplinking a Ruckus 7982 to a PoE enabled 5406zl Copper module. There is plenty of power availabe but all I get in the logs is the following:

I 09/06/08 22:12:17 00565 ports: port A11 PD Removed.
I 09/06/08 22:12:03 00561 ports: port A11 Applying Power to PD.
I 09/06/08 22:12:03 00560 ports: port A11 PD Detected.
I 09/06/08 22:12:00 00565 ports: port A11 PD Removed.
I 09/06/08 22:11:38 00561 ports: port A11 Applying Power to PD.
I 09/06/08 22:11:38 00560 ports: port A11 PD Detected.
I 09/06/08 22:11:34 00565 ports: port A11 PD Removed.
I 09/06/08 22:11:16 00561 ports: port A11 Applying Power to PD.
I 09/06/08 22:11:16 00560 ports: port A11 PD Detected.

HP FW: K.14.51m
Module: ProCurve J8702A 24p Gig-T zl Module

AP FW: 9.4.0.0
ZD FW: 9.6.0.0

[fabian_contrera]

Hey guys just wanted to let you know that I had the same problem that you guys have. I was using an e5412 chassis switch and for the life of me couldn't get them to turn on. I figured out that if you go into the poe settings of the HP and turn off Dot3 LLDP TLV your ap will turn on with no problem at all. You have to do this for every port but it worked no problem.