I know in some literature they talked of Ruckus being self-healing. You can't be if you manually are setting power. Manual power setting is fine for any initial design but if you get an unknown interference or want to introduce a new AP, or one dro...
I don't know about 500 users. If you have 500 users I don't know if 120 ms latency is high. I think it really depends on how much traffic is traversing the AP and the number of clients actively communicating. More clients is probably more latency ...
I also had a number of these; ap rebooted by the system. I could have 1 to 5 a day. Lately it's down to 1 every other day (check your events - look for "rebooted"). They had run a script to turn some things off on the aps for non essential service...
I'm probably going to play around with the channel mappings and power settings in one of my buildings and manually set them how I think it would be best. We'll see if that improves things or makes it worse. This is just a nightmare though. I don't...
To me, if you have an AUTO setting for power, that implies that you can manage the power. Which an enterprise controller should be able to do and that is what Ruckus says they are. The fact that you have to manually change power means that your AP'...
