Hi experts,we have brocade ICX 7450 switches, using for Core and distribution, core and distribution are connected to each other by LAG.one of the distribution's LAG interface port getting up and down continuously. i have checked there no any cable i...
Hi All,I hope that you are doing well...i am new in Brocade ICX family switches.i have one small query if any one can help me, it will be highly appreciated !!!!we have Brocade ICX 7450,7250 and 6430 switches and i am looking for script through i can...
Hi Sir,i catch below interface output, as i observed when eth1/2/1 start bouncing the core switch port show LACP BLOCKEDhere is the output-*--------------------------------------------------------------------------------SSH@BAL_Waluj_CORE_A_B7450#sh ...
Hi Sir,Thanks for response and sorry for late as i was on leave.the answer of questions as below Do you have syslog servers and if you see anything in the log before the port started to bounce?* i have SYSLOG svr but did not seen anything before the ...
Hi Sir,inspite of error cleared itselfI have cleaned the dust and swapped the SFP to cross check whether its SFP or OPTIC cable issue , i hope one of port will pop up the error if there is an issue.Thanks for your time and help.
HI sir,thanks for reply, Connectivity from brocade to that access switch is ok, today again i took sh optic eth1/1/6-----------------------------------------------------------------------------------SSH@WL_P1_D4-4WH-FA_L3-B7450_2.30#sh optic 1/1/6 Po...
