cancel
Showing results for 
Search instead for 
Did you mean: 

Wireless between buildings

kurt_5686453
New Contributor II
I currently have two buildings connected with fiber. I want to have these buildings connected with wireless as well as a backup route in case the fiber connection fails. Any tips on how I could achieve this?
6 REPLIES 6

ramprakash
New Contributor III
Kurt,
You can go for our Bridge or point to point product - ZF 7731 which is designed for your requirement.
http://www.ruckuswireless.com/product...

regards

Ramprakash

kurt_5686453
New Contributor II
The distance between buildings is about 200 feet. Would this work with a ZoneDirector 1100? Would we need a 2nd ZoneDirector in the remote building?

How would I handle the redundant links or would this be configured in my switches?

Thanks

red_cloud
New Contributor II
Kurt, 7731 supports up to 190 Mbps at 1.5 kilometers, and offers performance up to 50 Mbps at 10 km (LoS) .There is no need of a Zone Director for managing the 7731s, they work independently.

7731 bridge just forwards the traffic to its pair 7731, so the redundancy with the fiber should be configured on the switch side.

robert_11
New Contributor II
Could those be mounted just inside the exterior wall or should they be mounted outside and pointed at each other? Thanks
Labels