The time is not in sync between my ZD and ZF's. The ZD shows the correct time. All of the ZF's display the wrong time and cause problems with timed WLAN availability.
ZF and ZD are all on same subnet and can communicate.
All ZF show as Connected.
All ZF are the same model.
All ZF have been restarted.
The ZD has been restarted.
The other ZF are 172.16.2.2, 172.16.2.3, 172.16.2.4 etc.
The following settings are listed on the ZD and ZF.
Version 184.108.40.206 build 3
Your current system time is 26 February 2014 1:54:34 PM NZDT
Use NTP Server: YES
NTP Server: nz.pool.ntp.org
Select time zone for your location: (GMT + 12:00) Auckland, Wellington
Ruckus ZoneDirector IP Address: 172.16.2.100
Current Time (GMT): Wed Feb 26 00:54:40 2014
I meant physically in a different TZ. But if that's not the case, I think you're hitting a bug (which is also not in the current release notes - we fumbled) where daylight savings offsets aren't being passed to the AP properly (AP's always operate in GMT so the Timer instructions coming from the ZD need to have the offset applied before being passed to the AP - we are failing to do that)
The only workaround at this point would be to manually adjust your WLAN availability timers. You would need to do this adjustment each time NZ DST changes