cancel
Showing results for 
Search instead for 
Did you mean: 

Tacacs+ Configuration - Server Configuration

dave_hackenberg
New Contributor
I am configuring AAA using Tacacs. Authentication works, however, I do not have access to the "Configure" tab in the GUI and the Dashboard is blank. I am guessing this is an issue with the user's configuration in the Tacacs configuration file on the server. Does anyone know what changes need to be made on the Tacacs server?
5 REPLIES 5

keith_redfield
Valued Contributor II
Hi Dave,

This is not my area of expertise but I did some poking around and found this which looks relevant:

Depending on the privilege level supplied by the TACACS+ server, the

login user is authorized as

a.) Super Admin (Perform all configuration and management tasks on ZD)

(priv-lvl > 2 ( 3 - 15 ) )

b.) Operator Admin (Configure services, but no Admin privilege on ZD, e.g. cannot change logins on ZD)

(priv-lvl = 2)

c.) Monitoring Admin (Monitoring and viewing operational status only)

(priv-lvl = 1)
----

Hope this helps.

alex_peruyera
New Contributor
I have my admins set at priv-lvl 15 in Tacacs, yet they still have the greyed out config section, any other config changes I need to make here?

anthony_anyoti
New Contributor III
Hi-I would like to know if there was an answer for this, I have the exact same scenario but all users do not have access to the configure tab despite having pirv-lvl 15 on my tacacs server.

nuno_pimentel
Contributor
Anthony , and the rest, what you put on the ZD in Tacacs+ service field??
Labels