cancel
Showing results for 
Search instead for 
Did you mean: 

T301N on a zone director

robert_mc_nicho
New Contributor
I am running 8 -T301n ap's on a zone director 3025, but when i get 20 users on them the CPU in the unit shows it is running at 100% and the whole system bogs down, any suggestions
5 REPLIES 5

it_registration
Contributor
Are you saying the CPU of the ZD is 100%?  If so are you tunneling everything back to the ZD?

robert_mc_nicho
New Contributor
No it is the CPU on the T301 units, I am running 17 R700 units also through the same ZD (for a total of 25 ap's)They do not bottleneck the system. The units are connected back to the ZD via Fortigate 1 GB switches.

it_registration
Contributor
So the last time I had 100% CPU on my APs was due to multicasts/broadcasts.  Check out my response in this article: https://forums.ruckuswireless.com/ruckuswireless/topics/access-points-dropping-suddenly

OR maybe some of your clients have high retry rates?  Not sure grapsing at straws.  Could maybe be a firmware issue, if your R700's have no issues, but your T301's do.

prado_prado
New Contributor III
Hi Todd,

Do you still see CPU spike even after disabling directed multicast feature on the AP?

Regards,
Prado