08-02-2024 01:14 PM
Hello Everyone,
I'm trying to apply a rate limit across all clients, I had done this in 9.5 but it appears that in 10.5 there is only SSID and AP rate limiting.
Is there a way to limit per client usage on two SSID's on two separate VLANS? I could go application by application and do so but it seems silly to do so.
Thank you all
08-12-2024 01:46 AM
Hi @dan_younes,
You can set the Rate Limit per user or for the SSID under Wireless LANs >> Edit the SSID >> Advanced Settings
You can set the limit for both Uplink and Downlink direction>
Note : You can either use Per Station or Per SSID rate limit. You cannot use both at the same time on the SSID.