cancel
Showing results for 
Search instead for 
Did you mean: 

Management IP doesnt work when redundant controller is active

leonard_tsang
New Contributor III
Everything is OK when the primary controller is active but when the redundant controller kicks in as active, the management IP stops working...

Running 9.6 on a ZD3000
15 REPLIES 15

stuart_white_57
New Contributor
Hi I have seen this issue on a customers site before.

Do you have a gateway specified in the management interface?
If the two physical IPs of the controller and the "VIP" address are in the same VLAN then do not specify the gateway on the mgmt interface.

leonard_tsang
New Contributor III
In the management setup I didnt tick the box to specify a gateway for the management IP.

stuart_white_57
New Contributor
Are the physical and mgmt IP address all in the same local subnet?

leonard_tsang
New Contributor III
And also sometimes when I try to go to the management IP in a web browser, it crashes the active controller and thus cannot reach it on its own IP until a minute or so after.
Labels