cancel
Showing results for 
Search instead for 
Did you mean: 

MIgration from ZD3050 to SZ100

ricardo_reynaud
New Contributor
Hi,

I was checking the migration guide to migrate from a Zone Director to a SmartZone:
zd-to-scg-vscg-sz-ap-migration-rg-20150417

I want to migrate a site with around 600 APs and I don't want to have to factory reset and install a Solo FW.

Do you know if this is still the correct guide or if there is a newer one?

Thanks,
Ricardo
1 REPLY 1

michael_brado
Esteemed Contributor II
Hi Ricardo,
   No interim re-flashing AP code is necessary, if using current SmartZone firmware
which has an 'lwapp2scg' process enabled by default since SZ 2.5.0.1.x, 2.6+, 3.0+.