cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware Upgrade ZD1106

cengiz_dinc
New Contributor II
Hello,

We have a ZD1106 (9.7.1.0 build 32) with 18 access point ZF7372. We are planning to update the firmware ot these devices. Is there any recommendation (educated action plan) for upgrading from 9.7.1.32 to the Recommended Firmware (9.10.2.0.73).

Thanks in advance.
Cengiz
5 REPLIES 5

thomas_fankhaus
Contributor II
follow the upgrade path otherwise you loose the config. 
for 9.10.2 you need at least 9.9.0.0.205 
then you should upgrade first to 9.9.0.0.205

cengiz_dinc
New Contributor II
Thanks, can I update it 9.7.1.32 to 9.9.0.0.205 directly? or should I update step by step (9.7 to 9.8 to 9.9)?

Also I saw that post (https://forums.ruckuswireless.com/ruckuswireless/topics/all-accesspoints-zf7372-disconnected-after-u...

Thanks

DarrelRhodes
Contributor III
Hi Cengiz,

Check the Ruckus Release Notes for each of the major releases (9.8, 9.9, 9.10), this will tell you what the minimum version is you can upgrade from.  You'll definitely need to do it in multiple steps to get to the latest from 9.7.

The release notes are available on support.ruckuswireless.com

Hope that helps,
Darrel.

cengiz_dinc
New Contributor II
Hi Darrel,

Yeap I'm looking into those documentations. I just asked for maybe someone has same hardware configuration like us and did the same upgrade and also likes to share 🙂

Looks like I'm going into long way. If we will do the update, I will share my notes here.

Thanks.