Configuring 2 SSID on ZoneDirector 1100

[gwendal_praud]

Hi everybody !
I have a ZoneDirector 1100 and 3 AP which are normally detected by the ZoneDirector.
Before I had one SSID which was connected to a captive portal and the users used that easily.
Now, I want to have 2 SSID on all my AP but both are treat differently.
The first one will
be called "Users"
have specific IP network number (ex 192.168.0.0/25)
have a specific DHCP
have a captive portal
VLAN 11

The second will
be called "Guest"
have specific IP network number (ex 192.168.0.128/25)
have a specific DHCP
Firewall restrictions
VLAN 12

My firewall Pfsense (DHCP) is connected to the ZoneDirector which is connected to the APs.

I have tried to use VLANs for each SSID but when it is in use, the communication between the ZoneDirector and the firewall don't works.

How can I create my two SSID ?
Can you help me please ?

Thank you in advance

[gwendal_praud]

My problem was that I hadn't understood VLANs are not tagged on the frames. So, now I understand my error and cannot make the difference between both SSID with Pfsense. I will make my flow control on the ZoneDirector.

Thanks again for your help