Anyone using Cacti?

[john_case_56682]

I am running Cacti for monitoring our network, and would like to monitor the Zone Director as well. What I'm running into is that there are no Cacti templates out there and I'm not comfortable building my own. Has anybody built a Cacti template that monitors the ZD or APs?

[david_monachin1]

Here are some of the OID's i Poll. Would still be really nice to get an executive level report off of the ZD though!

Total Associated
1.3.6.1.4.1.25053.1.2.2.1.1.1.1.1.30
Attempted Authentication
1.3.6.1.4.1.25053.1.2.2.1.1.1.1.1.26
Number of Clients
1.3.6.1.4.1.25053.1.2.2.1.1.1.1.1.12
Successful Authentication
1.3.6.1.4.1.25053.1.2.2.1.1.1.1.1.28
WLAN Rx Bytes
1.3.6.1.4.1.25053.1.2.2.1.1.1.1.1.14
WLAN TX Bytes
1.3.6.1.4.1.25053.1.2.2.1.1.1.1.1.16
WLAN Rx Packets
1.3.6.1.4.1.25053.1.2.2.1.1.1.1.1.13
WLAN Tx Packets
1.3.6.1.4.1.25053.1.2.2.1.1.1.1.1.15

[keith_redfield]

This is a great conversation that's separate from the main topic, so I created a new topic to continue the discussion. Please reference the new topic here: Better reporting on-device

[odilo_univali]

We are using Cacti to monitor our APs and ZD.. it has been really helpful for us..
If you want we can share with you our Cacti templates 🙂
Here is some graphs screenshots..



ps: the only little problem is that sometimes the ZD stop anwser to SNMP requests, like on the graph above it's shown a gap between 18:00 and 00:00.

[keith_redfield]

@Odilo - this is great, thanks very much!

[shawn_412860]

I would love a copy of your templates also.... sross at calvaryonline dot cc