cancel
Showing results for 
Search instead for 
Did you mean: 

Airtime fairness and improving media access

alberto_de_la_c
New Contributor III
Hi guys,

Is airtime fairness set by default? We are finding problems with data traffic when AP reach the number of 30.

Let me explain scenario. We have an AP with around 30 fixed CPE clients. Pings are stable but they increase latency (also PER raises) at around 10:00 (when traffic demand increases). Do you have documents or information about congestion? I have seen "wifi stress test" but doesn't clarify me so much.

Version is 9.5.2 build 15. ZD 1100 and 7762 AP. No huge interference in the area. 20 mhz channel.
CPEs work on 5 ghz, nanostation m5.
7 REPLIES 7

alberto_de_la_c
New Contributor III
I would like to retrieve this thread to know how airtime fairness is working. AFAIK, there is some kind of fairness, based on PHY information (data rate), top layer information, ... how is doing Ruckus airtime fairness?

Thanks
Alberto.

binh_minh_nguye
New Contributor
Could anyone share where to enable or disable airtime fairness. I am using SZ 100 and R510 AP, thanks alot