cancel
Showing results for 
Search instead for 
Did you mean: 

Reboot

CourtneySnow
New Contributor

Please give me instructions to reboot

1 REPLY 1

sanjay_kumar
RUCKUS Team Member

Hi @CourtneySnow 

The AP reboot can be done by either from the CLI or GUI.
From the AP CLI (SSH access) you can use the command "reboot"

From the GUI:
If the controller is SZ\vSZ:
1. Go to Access Points tab >> Select the AP >> Click on More >> Click on Restart

If the controller ZD:
1. Go to Access Points tab >> Select the AP >> Click on More >> Click on Restart

If this is Unleashed :
1. Go to Access Points tab >> Select the AP >> Click on Restart