Unleashed traffic flow and Management VLAN

[roger_perkin_jp]

Hi, 

I am deploying 25 x R510's and have been told that setting up an unleashed network is very easy!

After a day I have a few questions. 

My setup is a school with two switches - one in each building - buildings are 15m apart so am hoping the mesh can stretch between the two. 

My question is where does the traffic flow? 
I am configuring each AP to drop main network to VLAN 4 and Guest network to VLAN 5
Does this traffic drop locally at the AP and on the network or does it backhaul to the Master AP and drop out there? 

Also I am having issues with the management VLAN for these devices and need to understand if all the devices need a management IP or just power? 

As when I have 3 AP's connected and I try to change the IP of one of the AP's it says to go to system settings which just points me to the IP address of the Master 

I hope this makes sense 

Network is based on Cisco SG300 switches and all ports are trunk with native VLAN on trunk port being the management IP for the AP's 

Thanks
Roger 
https://www.rogerperkin.co.uk/

[william_schippe]

Hi Darrel,

Thanks for your swift reply. As a developer i understand it's hard to say anything about eta's. New features will take quite some time before they reach production. Is it expected to be at least 6 months, or could it be earlier as well?

A very rough indication would be great.

Thanks

[michael_brado]

Product Management created Unleashed for SMB as a single LAN deployment.
ZoneDirector and SmartZone controller management has always supported multi-VLAN WLANs.
I would not expect an Unleashed Management VLAN feature request to be implemented in 6 months.