cancel
Showing results for 
Search instead for 
Did you mean: 

Unleashed Band Balancing tuning

jason_pearcy
New Contributor III
I have two Unleashed R600's and all of my devices but two cameras have 5ghz radios in them but 90% of my devices are connecting to the 2.4ghz radios in the R600s. Even within 10 feet and clear line of sight my devices do not connect to 5ghz without me forcing the device to use 5ghz only. Any ideas?
7 REPLIES 7

john_d
Valued Contributor II
Awesome! As probably one of the few home use customers, I'm super excited about Unleashed. It already shows a lot of promise and I'm looking forward to seeing future releases bring more feature parity with ZD! 🙂

Still no solution for 2.4Ghz or 5 GHZ band per SSID! Please get it on a new firmware!

jason_pearcy
New Contributor III
Yeah this environment is my house, and I'm not going to exceed 10 devices on either radio. I turned the percentage of 2.4ghz clients down to 10%. I will try 1%. If I had the cli to work with I would try the other suggestions here. Looking forward to future software enhancements.