08-29-2021 04:15 PM
If you have SNMPv3 enabled, after a firmware upgrade and reboot the device stops responding. It is easy to restore it, you just have to uncheck "Enable SNMPv3 Agent", save, then check "Enable SNMPv3 Agent", and save again. I was hoping someone could mark it a bug and fix. 🙂
PS: Ruckus R610 if that helps.
08-30-2021 03:21 AM
Thank you for reporting the issue.
Can you please help to get the below details.
1)Hardware details.(ZD or Smartzone)
2)Version of Firmware that this issue is reported.
08-30-2021 07:08 AM
The R610 is running Unleashed, it was originally a ZoneFlex, I had the issue with the latest firmware (184.108.40.206.246) and the last few before that.
09-01-2021 03:05 AM
Thank you for the details.
Can you please open up a support case and we will proceed further on this to check the behavior.
09-01-2021 07:27 AM