cancel
Showing results for 
Search instead for 
Did you mean: 

R720 Not saving CLI configs

robert_allen
New Contributor II
I have an R720 running Unleashed 200.7. When I issues commands to disable igmp and directed multicast the settings aren't saved after a reboot of the AP. 

Commands issued are:

set qos eth1 igmp disable
set qos eth1 directed multicast disable
get qos eth1

That shows the services disabled. But when I reboot they show enabled again.

Is there a save command that is being missed. 
3 REPLIES 3

michael_brado
Esteemed Contributor II
AP CLI commands often do not persist a reboot.  You want to configure these parameters on the WLAN(s) they advertise.

robert_allen
New Contributor II
How do you configure those on the WLAN? I don't see an IGMP option in the GUI on the WLAN? Or is that not a tuneable option? 

michael_brado
Esteemed Contributor II
Here is a Knowledge Base Article, https://support.ruckuswireless.com/articles/000006234



You can try each of your AP commands on the WLANx that corresponds to the one(s) you use, instead of the Eth1 interface.