How do I set 160Mhz Channelization on R610 Unleashed?

[michael_berger_]

I'd like to use 160Mhz Channelization for my R610 Unleashed in order to get the maximum throughput with my new Intel 9260 Wireless Adapter.

I can't find a setting for this an it only uses 80MHz channels at the moment.

[critical_646660]

Any updates with 200.9?

[tony_heung]

160Mhz channalization is introduced in 200.9 released last week.  You can turn on the individual Wi-Fi 6 AP or add ap-group of the Wi-Fi 6 APs under "Access Points".  See below screenshot.

[s_p_choo]

Hmmmm... I do not think it applies to all APs, my AP R750 does not have 160mhz still, even though it is on 200.9

[ryan_press_kzvu]

Make sure to set Admin & Services -> System -> Country Code option to Optimize for Performance

[tony_heung]

S P Choo, do you mean you don't see the 160MHz option from the pulldown menu OR you don't think it is applied to the AP even though you had chosen 160MHz?  You can verify this by going Access Points -> R750 -> System Overview Info, then go down to the Radio section, you should see the Channelization item showing 160 under the 5GHz column.