Bandwidth management rate limiting

[LANTECH]

Hello everyone, 

i want to ask a question that, while configuring rate limits either per station based or per SSID based, what does the below numbers means which are given on the right side where we have to enter the bandwidth rate limit on unleashed network. 

1- for per station based  the numbers or given range in brackets (0.1-200.0)

2- for per SSID based, the numbers or, given range in brackets (0.1-500.0)

does it mean that, we can not enter the value greater than 200 Mbps for per station uplink and downlink.

the same way for SSID, we can enter the value greater than 500 Mbps..

am i right?

[Squozen]

Yes, the limits are in Mbps, as stated in the GUI. 

[LANTECH]

Hey thanks for your help.

i want some more info regarding ruckus unleashed network. 

i have Ruckus R510 access points with Unleashed firmware version 200.15.... .

i can create multiple SSID / wi-Fi networks with different VLans but i can't define different DHCP pools for each VLan. 

actually i want 2 VLans . one is for my office and second is for our guests. i want clients on different SSID to have different networks. 

is that possible? 

i mean can i assign each SSID with different VLan ID to have separate DHCP Scope?

kindly help me out. 
Thanks in advance.