cancel
Showing results for 
Search instead for 
Did you mean: 

R600,SZ100 is taking overload latency with 30 clients

harvi_yesid_cal
New Contributor II
R600 aps are working fine(answers about 1-5ms to gateway LAN), until 30+ clients connect to the SSID on same AP(300-600ms to gateway LAN).

Controller version: 3.5.1.0.862
Control Plane Software Version: 3.5.1.0.820
Data Plane Software Version: 3.5.1.0.807
AP Firmware Version: 3.5.1.0.1010
15 REPLIES 15

michael_murphy_
New Contributor
Experiencing issues with 3.4 and 3.5.  Similar high latency and high utilization.  Issue roves.  Lots of problems.

harvi_yesid_cal
New Contributor II
what's your configuration?

I have 2 SSID on all Access Points, if you like better write to +573162267697 Whatsapp number, maybe we can talk about issues and try solve faster.

Best regards.

jamie_walmsley
New Contributor III
Im using the same firmware version on an SZ300 and have 3 R700 AP's that I'm seeing the same behaviour with. High unexplained latency on 5Ghz see image below. Havent done a great deal of investigation yet.

Image_ images_messages_5f91c439135b77e2479ca2ec_9baed0f2e1abd4158dd590b7deea5a7b_RackMultipart20171220302431hxs-f2c387c1-3e9a-4176-b759-85ed01e340da-1814940918.png1513780020

We are running R710s with vsz100 controller 3.6.2.x.x, no vlanning and wireless clients connected to the APs are no where near 100, more like under 25 clients and 5g experiences latency.  Would love to hear an update on your situation.