![Image_ images_messages_5f91c453135b77e247a2590f_f58afe8400a6f65e068a7f459d873591_RackMultipart20200509182571n58-e5e70ae9-6b95-423a-a6be-006158ca1292-959170130.jpg1589042734 Image_ images_messages_5f91c453135b77e247a2590f_f58afe8400a6f65e068a7f459d873591_RackMultipart20200509182571n58-e5e70ae9-6b95-423a-a6be-006158ca1292-959170130.jpg1589042734](/t5/image/serverpage/image-id/1450iC4537F9D316783CE/image-size/large?v=v2&px=999)
More info. Since my last post I managed to connect to an R720 wirelessly using the serial number of the AP. All I could do was to edit the properties of the AP to give it a fixed IP address (I think). There is no internet signal being transmitted by the AP and also the ZD1200 still cannot find it. If I type 192.168.1.210 into my browser it won't find the AP. I have not adjusted the settings on my ZD1200 (I have only run the set up wizard and configured it for IP4 only). Also, I have also just done the quick set up on my ICX 7150 12C switch and set no other settings.
My network diagram follows.