How to enable band-balancing or band-steering for ZF7962 AP in standalone mode with firmware 9.8.0.0.373?

[francis_kk_ho]

How to enable band-balancing or band-steering for ZF7962 AP in standalone mode with firmware 9.8.0.0.373? In 9.8 or above, it seems band-steering command not to be found and finds band-balancing only, but I can't find any command to enable band-balancing / band-steering mode through CLI in ZF7962 AP standalone mode. Thank.

BR.,
Francis

[michael_brado]

Hello,

   Standalone AP band-balancing is fixed in base image 100.x firmware, available for your
individual AP platforms under the Support site Downloads.  Band-steering is enabled by
default, but you must *enable* band-balancing if desired.

rkscli:

rkscli: get version

Ruckus 7372-U Multimedia Hotzone Wireless AP

Version: 100.0.0.0.127

OK

rkscli: get band-balancing svcp

Band Balancing:

         wlan0:  Disable

         RSSI Threshold: wlan0, 15

         Band Balancing Percent: wifi0, 25

         MinSta Threshold: AP, 10

         Under Mesh AP : Off

OK

rkscli:

rkscli: set band-balancing svcp enable

OK

rkscli: get band-balancing svcp

Band Balancing:

         wlan0:  Enable

         RSSI Threshold: wlan0, 15

         Band Balancing Percent: wifi0, 25

         MinSta Threshold: AP, 10

         Under Mesh AP : Off

OK

rkscli: