Hello, As I deployed the IoT server on Hyper-V. Installation is successful and I can able to log in.
As the IoT controller network Interface and VsZ are in the same vlan (vlan ID 50 ) so i can able to onboard AP in the IoT controller.
I am facing a challenge that for Assa Abloy server is not communicating with the IoT controller.
As i tagged vlan 21 which belongs to the Assa Abloy network to the port where my IoT controller connected to the ruckus 7150 Switch.
Please advise how I can make vlan routing on the switch to communicate.
