cancel
Showing results for 
Search instead for 
Did you mean: 

ZoneFlex 7982 & Cisco 2960T/S POE problem

jean_francois_l
New Contributor
Hello,
We recently receive a new batch or ZoneFlex 7982 and they seem to be not possible to get power thru our Cisco Switches 2960-T os S model which were powering already older ZoneFlex 7982 models that we had purchase six months earlier..
We get a Power-3-controller-port-err, Power controller reports power Imax error detected, What should we do to resolve our problem?
THX
7 REPLIES 7

michael_brado
Esteemed Contributor II
Also try powering your 7982s on every other (alternate) ports, and does that work?
How about 1 AP for each 4 ports? Some switch manufacturers use one power transceiver to power blocks of 4 ports. Spreading the power draw may help.

luis_vivar
New Contributor II
Is there a solution for this problem?

monnat_systems
Valued Contributor II
yes, AFAIK, new ZF7982 hardware addresses the POE incompatibility issues. this is well documented in release notes..