is it possible to enable SNMP on Wireless AP and get it via the network and
monitor via PRTG?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-12-2018 03:17 AM
is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?
5 REPLIES 5
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-12-2018 04:13 AM
Yes...you can configure
Try "set snmp" and press "tab" and find tge available option
Try "set snmp" and press "tab" and find tge available option
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-07-2018 01:38 PM
not sure why, but this does not show you how to ENABLE snmp (only set the options) , tried set snmp enable or enabled give output below (ie cmd not found):
Usage: set snmp {options}
->version, SNMP version(v2c,v3,both)
->system contact, SNMP V2c system contact
->system location, SNMP V2c system location
->community ro, read-only community name
->community rw, read-write community name
->trap {enable|disable}, SNMP V2c trap enable flag
->trap-svr, SNMP V2c trap server ipaddr
rkscli: get snmp
SNMP enable : disable
SNMP version : v2c and v3
SNMPv2 ro community : public
SNMPv2 rw community : private
SNMPv2 sys contact : https://support.ruckuswireless.com/contact_us
SNMPv2 sys location : 'xxxx'
SNMPv2 trap enable : enable
SNMPv2 trap server :
SNMPv2 trap/inform
rkscli: set snmp enable Sorry, no match to set snmp enable found
rkscli: set snmp up
Usage: set snmp {options}
->version
Usage: set snmp {options}
->version
->system contact
->system location
->community ro
->community rw
->trap {enable|disable}, SNMP V2c trap enable flag
->trap-svr
rkscli: get snmp
SNMP enable : disable
SNMP version : v2c and v3
SNMPv2 ro community : public
SNMPv2 rw community : private
SNMPv2 sys contact : https://support.ruckuswireless.com/contact_us
SNMPv2 sys location : 'xxxx'
SNMPv2 trap enable : enable
SNMPv2 trap server :
SNMPv2 trap/inform
rkscli: set snmp enable Sorry, no match to set snmp enable found
rkscli: set snmp up
Usage: set snmp {options}
->version
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-07-2018 07:12 PM
You want "
set remote-mgmt snmp
"
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-16-2019 12:20 AM
any body have a knowledge of snmp v3 on rukus ap please upload

