Using a T710 with P300 connected to PoE out for back-haul

[michael_hypolit]

I need to provide Wifi To areas with no wired network infrastructure, mounting locations will be on the light pole. I was wondering if the ports on the T710 acts like a switch/hub where i use one 902-0180-XX00 injector to power the T710, then connect the P300 to the PoE out port on the T710, and they communicate that way to back haul the traffic to a central tower with another P300 wired into a switch.

[nnamjin_roh]

You can use this scenario.  I use to have a same cae.