cancel
Showing results for 
Search instead for 
Did you mean: 

R710 5Ghz Radio keeps dropping

stephen_lee_j83
New Contributor II
Hi I've got a R710 operating in standalone mode. 2.4Ghz Radio is solid but 5Ghz Radio keeps dropping, the SSIDs are not broadcast & when I check the Web Interface all the 5 Ghz have no Bssids but wireless status is up & broadcast SSID is Enabled. After a few minutes the SSIDs are broadcast & the BSSIDs are listed in Web Interface.?
3 REPLIES 3

michael_brado
Esteemed Contributor II
Are you running the latest firmware for R710 standalone?

stephen_lee_j83
New Contributor II
Hi Michael, 
I'm running 104.0.0.0.1374.
I am connected to a MBP via a Ubiquiti EdgeRouterX.
Thanks 
Stephen

michael_brado
Esteemed Contributor II
Hi Stephen,
 
     Sorry, I dont' know what MBP stands for, but I looked up specs on "Ubiquiti EdgeRouterX"
that says they make passive and PoE models.  On a far chance, if you happen to power your
AP from this device, and all the other ports too, could our AP be losing power from the ER-X
such that it's 5G radio blinks?  Not sure, just an idea.  Your AP support info logs might offer
some other insight into what's happened.