cancel
Showing results for 
Search instead for 
Did you mean: 

POE+ on R710 and SG300-10MPP

an_nguyen_cl022
New Contributor III
Hi all,

I've buy the Cisco SG300-10MPP for 3 R710, two of devices support 802.3at POE+

But when i use command "get power-mode" on R710. The result display R710 is running in 802.3af mode.
Please help me to find the solution, that will make our R710 can running 802.3at with SG300-10MPP

Many thanks!
13 REPLIES 13

an_nguyen_cl022
New Contributor III
Can anyone help me?
Thanks a lot

michael_brado
Esteemed Contributor II
Does SCG300-10MPP support LACP and LLDP?

Hi Michael,

SG300 support all LACP and LLDP.
But why we need LACP here? In my thought, Ruckus and Cisco will discussion about Power via LLDP

Thanks!

Hi Michael,

I need config R710 running 802.3at by manual,
But, our switch only support 15.4W per port, Can R710 running 802.3at with 15.4W