This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject

 

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

 

Ruckus Wireless
RUCKUS Self Help |   ASK the Pack
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Is there any additional configuration needed to enable this LAN port?

Natthakrit
New Contributor

‎02-20-2025 07:49 PM

I am using an R610 connected to a Power Injector for power supply, with the other end of the Injector left unconnected. The R610 is configured for mesh networking to connect to the network. I am trying to connect a notebook to the LAN port on the R610, but the port is not coming up, preventing the notebook from connecting. Device details: - Controller: Ruckus SmartZone 1200 - Access Point: Ruckus R610 Is there any additional configuration needed to enable this LAN port? Please advise if there are specific settings required to get this port working.

0 Kudos
Reply
1 REPLY 1

vasanth_edward
Contributor III

‎04-28-2025 08:01 AM

Hi Natthakrit,

Thank you for contacting RUCKUS Support via the Community Forum.

As per the R610 datasheet (https://webresources.ruckuswireless.com/datasheets/r610/ds-ruckus-r610.pdf), for the LAN1 port to function properly, the Access Point must be powered using 802.3at (PoE+).
Kindly ensure that the AP is receiving adequate power.

Did I answer your query? If yes, hit the Kudos button and also accept the answer as
Accepted solution.

 

0 Kudos
Reply
Copyright © 2026 Khoros, LLC