H510 PoE out with DC Power

[Digger_321]

Hi, 
is it possible to use the H510 PoE out if I power the AP via a DC adapter and not via a PoE switch?

Thanks for the help

[Vásquez_Fer · Accepted solution]

Hi @Digger_321 

Hope you are doing well 

I hope this can be useful for you

H510 Power Options and Available Power Out for PoE Out and USB

 H510 Power Source Power                    Available for PoE Out and USB

• 802.3af PoE                                               PoE 5W total
• 802.3at PoE                                              12.95W PoE Out (802.3af Class 3) and 0.5W USB
• DC power adapter (sold separately)      12.95W PoE Out (802.3af Class 3) and 0.5W USB

Note: The LAN1+PoE port is intended for PoE-powered peripheral devices such as IP telephones.

Link: https://support.ruckuswireless.com/documents/1789-ruckus-wireless-h510-quick-setup-guide

Best Regards 

Fernando Vasquez 

[Digger_321]

Exactly the info I needed. Thank you, I have probably overlooked in the manual.

[Vásquez_Fer]

No problem at all ! @Digger_321 

At any time, you are welcome

Best Regards 

Fernando Vasquez