cancel
Showing results for 
Search instead for 
Did you mean: 

All SSID's are broadcast but I just want the local SSID's visable at the current location

chuck_aaker
New Contributor III
All SSID's are broadcast but I just want the local SSID's visable at the current location.  We have 5 locations, each location will have a user and guest SSID,  we want only the local SSID to be visible at each location.  Maybe I am just missing something to make this work.
2 REPLIES 2

keith_gipe
New Contributor II
You can create WLAN groups for each location that only have the SSIDs you want broadcast selected, then create AP groups that have the AP's for those locations in them and override the default WLAN group there.

chuck_aaker
New Contributor III

Thank you,  I did the over ride on the groups,  and now they appear correctly at all locations.  I am waiting for the APs to be connect at one location.   With that, I did find out that if you don't have the APs connected at a site when you do the override it does not retain the setting,  even though it does not show up in other location.  I will see if the setting is retained after we connect the APs.  Interesting?