nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

QoS Settings not persisting across reboots

Rucky860

The other day I ran the following commands on my R650s with Unleashed 200.14.6.1.203:

enable
ap-mode
set qos igmp_query v2 enable
set qos igmp_query v3 enable
set qos mld_query v1 enable
set qos mld_query v2 enable
set qos eth0 mld enable
set qos eth1 mld enable
set qos eth0 directed multicast disable
set qos eth1 directed multicast disable
set qos directedRA disable
set qos directedDHCP disable
set qos forward_querier enable
quit

After both APs are rebooted, the following settings are NOT persisted:

get qos:

IGMP General Query V2/V3: Disabled/Disabled
MLD General Query V1/N2: Disabled/Disabled

get qos eth0/eth1:

Directed Multicast: Enabled

MID Snooping Mode: Disabled

Find more posts tagged with

Accepted answers

sanjay_kumar

Hi @Rucky860

I found the reason, the config changes which you are making is from the "ap-mode" which is not exactly the Master CLI mode but the AP CLI mode.
After making the changes, it will hold the config, but in fact it will saved as AP config and not in Master config. To save the config in the Master the settings as to be from the "Config" mode rather than the "Ap-mode".

So once the AP reboots, the AP config will override based on the Master config. Which is why the settings made from the ap-mode prompt is not saving.

All comments

Rucky860

Bump.

Rucky860

This issue is very repeatable. I power cycled both R650s and some QoS settings (in original post) are lost. This clearly seems to be a bug. Can someone from Ruckus comment?

Rucky860

@8vin Any thoughts?

Rucky860

Can anyone help here? Seems like broken firmware.

syamantakomer

Hello @Rucky860,

You are making these changes from AP mode, which cannot survive the reboot.

Let me ask one of our team members to verify if there is a way to do it and get back to you.

sanjay_kumar

@Rucky860

I'm checking this in lab and I should be able to provide you with an answer shortly.

sanjay_kumar

Hi @Rucky860

I have checked this in lab with the same version, and I can see that the below settings are not persistent as you mentioned.
IGMP General Query V2/V3
MLD General Query V1/N2

Let me check more on this and update you with the root cause.

sanjay_kumar

Hi @Rucky860
Let me know if you have any further queries on this.

vesalius

@sanjay_kumar @syamantakomer Unless I am doing this wrong, Once in the config mode on the Master (not ap-mode), then 'set' is not a valid command.

Welcome to Ruckus Unleashed Network Command Line Interface
ruckus> enable
ruckus# config
You have all rights in this mode.
ruckus(config)# set qos eth0 mld enable
The command is either unrecognized or incomplete. To view a list of commands that you can run  from this context, type '?' or 'help'.
ruckus(config)#

Rucky860

I've since migrated my APs to Ruckus One, so I can't re-test with your additional information. I do appreciate the response though.

sanjay_kumar

Hi @vesalius
This is a WLAN mode command, try the command as below:

Please login: admin
Password:
Welcome to Ruckus Unleashed Network Command Line Interface
ruckus> en
ruckus# config
You have all rights in this mode.
ruckus(config)# wlan testing
The WLAN service 'testing' has been loaded. To save the WLAN service, type 'end' or 'exit'.
ruckus(config-wlan)# qos mld-snooping
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-wlan)#

koatic

We have same issue and cannot configure the AP-group mode to persist reboots.

firmware 200.15.6.12.304

ruckus(config-apgrp)# model r550 port-setting
ap_name: r550
The model could not be configured in unleashed.
ruckus(config-apgrp)#

Any update on this issue???

Rucky860

I'm now on Ruckus one, but curious if Unleashed will get fixed?