Hello,
I am trying to configure "ip ssh source interface" on the new 8200 platform, but it looks like that configuration has been depreciated.
Hey @corey_costello
The command has changed and you will now want to use the 'management source-interface' command. Please see the reference below:
https://docs.commscope.com/bundle/fastiron-10010-commandref/page/GUID-086C381B-CB6C-466E-A5B7-0569AF3A9444.html
Hope that helps!
**bleep**, it looks like the functionality changed as well.
I used to use this to restrict inbound SSH to a specific VE.
Have you looked at the 'management access' command?
There are quite a bit of changes from 8.x > 9.x > 10.x. I would definitely recommend looking at the new 10.x documentation. Generally speaking, you should be able to get to the same or similar functionality, but it may look different in 10.x.
