FLS648 switch erased flash

Question

Hi

Unfortunately, the primary and secondary flash of my switch are erased and it is not able to boot anymore.

BOOT INFO: primary does not exist

BOOT INFO: secondary does not exist

How can I recover the lost firmware?

Regards

BenBeck · Answer

Wow! FLS is a very old switch! I have not worked on one of those in years. If you are able to access bootmon, I believe the recovery via tftp server should look like this: Reboot Continuously tap 'b' from console connection to enter bootmon Monitor>ip address Monitor>ip default-gateway Monitor>boot system tftp *once booted, you will need to do a normal tftp copy to flash via FastIron CLI

Chandini · Answer

Hi TestUser

Thank you for reaching us.

Could you please let me know if you are from Lennar Home ?

Please refer the below link for software recovery procedure.

* https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/td-p/47483

I hope this helps.

Thanks