nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

New ICX Switch in Lennar home

willkr3

Hello,

NI need help accessing web UI of switch that I purchased for Lennar home. It was a pre-owned switch that was reset. I can't seem to access it via browser from IP or CLI via SSH. I don't have PuTTy or a console to connect directly. Can you help me access this so I can configure this device for my network?

Thanks

Find more posts tagged with

Lennar homes

ICX

Accepted answers

Yarenis

Hi @willkr3

The default credentials should be super as the username and sp-admin as the password. If they do not work, please try the credentials from the Lennar list below.

Default Admin Login Username/Password for RUCKUS ICX-7150-C12P Switches and Wi-Fi Access Points

https://community.ruckuswireless.com/kb/articles/14-default-admin-login-username-password-for-ruckus-icx-7150-c12p-switches-and-wi-fi-access-points

Best regards,
Yarenis Hernández
RUCKUS | Lennar Home Community Support

All comments

Yarenis

Hi @willkr3

ICX7150 switches do not require any additional configuration for Lennar homes; you just need to connect the cables. However, if web access is not enabled, you will need to access the switch and enable it. Let me share the required commands and the guide for the cabling setup

Enable
configure terminal
device(config)# aaa authentication login default local
Switch(config)#crypto key generate
device(config)# aaa authentication web-server default local

stablishing Console CLI Access on the RUCKUS ICX-7150-C12P Switch

https://community.ruckuswireless.com/kb/articles/15-establishing-console-cli-access-on-the-ruckus-icx-7150-c12p-switch

Process for performing a physical factory reset (Hard Reset) on the RUCKUS ICX-7150-C12P Switch

https://community.ruckuswireless.com/kb/articles/11-process-for-performing-a-physical-factory-reset-hard-reset-on-the-ruckus-icx-7150-c12p-switch

Best regards,
Yarenis Hernández
RUCKUS | Lennar Home Community Support

willkr3

Thank you. I was able to find this and access a log in page from my mobile device. I did reset the switch by pressing the reset when I initially set it up. How can I obtain the default log in to manage the switch?

Yarenis

Hi @willkr3

The default credentials should be super as the username and sp-admin as the password. If they do not work, please try the credentials from the Lennar list below.

Default Admin Login Username/Password for RUCKUS ICX-7150-C12P Switches and Wi-Fi Access Points

https://community.ruckuswireless.com/kb/articles/14-default-admin-login-username-password-for-ruckus-icx-7150-c12p-switches-and-wi-fi-access-points

Best regards,
Yarenis Hernández
RUCKUS | Lennar Home Community Support

MariaC862

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,

RUCKUS | Lennar Home Community Support

willkr3

we were able to resolve the username and password. I am now wondering if there is a good solution for mounting the switch inside of the Legrand in wall network enclosure.

MariaC862

Hi @willkr3

Thank you for the update!

I did answer your query about the switch mounting on your other post, here

As the main issue for this post has been resolved I will go ahead and mark it as resolved and close it.

If you have any other questions feel free to reach out anytime!

Thank you.