I had a similar issue, and followed these steps and it's been working for 2 hours without dropping again. https://support.ruckuswireless.com/articles/000015159
It was a pain, and I had no idea what i was doing, so every time I got an error I asked Claude what I was doing wrong, and that helped me trouble shoot.
Hi @Aalosays
Greetings!!!
Thank you for reaching out to the RUCKUS Lennar Home Community.
We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.
Based on the information provided, it appears that your Switch rebooting frequently.
We apologize for any inconvenience this has caused and are committed to assisting you promptly.
We may need to check some configurations of your RUCKUS ICX-7150-C12P Switch to troubleshoot this issue.
To proceed with troubleshooting the issue, please follow the steps outlined below to access the Command Line Interface (CLI) and provide the necessary command outputs:
1. First, identify the current IP address assigned to the switch ICX-7150-C12P by your local router. You can use an IP scanner tool to easily locate the switch's IP address on your network. Here is a guide on how to perform this using IP Scanner free applications:
/kb/articles/10-how-to-find-the-ip-address-of-the-ruckus-devices-switch-and-aps-using-ip-scanner-free-applications
2. Once you have identified the IP address of the switch, proceed to access the Command Line Interface (CLI) of the RUCKUS ICX-7150-C12P switch. Here is a guide on how to access the CLI:
/kb/articles/8-how-to-access-the-command-line-interface-cli-of-the-ruckus-icx-7150-c12p-switch
If you can access the Command line the prompt should look like below:
ICX7150-C12 Router> OR
ICX7150-C12 Switch>
3. After successfully accessing the CLI, please execute the following commands and provide the outputs:
enable
show version
show flash
show inline power
show inline power detail
show interface brief
Please share the command outputs or screenshots if you encounter any issues or errors during these steps.
Feel free to reach out if you have any questions or require further assistance.
Thank you for your cooperation and patience.
Best regards,Imran SanadiRUCKUS | Lennar Home Community Support
I trust this message finds you well.
I kindly request an update on the status of the issue so that we may proceed further with resolving it.
Thank you.
Please see the Important Announcement Below.
Important Announcement! As a part of our Community Platform Migration the community will be temporarily placed into read-only mode from Monday, August 10 through Monday, August 17 (and only during this time period), For any Lennar RUCKUS devices related issues please email us at ruckus-lennar-support@ruckusnetworks.com for assistance. You can also continue reviewing the Lennar Knowledge Base and the Lennar Support board during this period.
Thank you!
